Calibrating with SIKA pays off!
Scroll down
Temperature calibration service
The temperature laboratory is accredited for temperatures from -30 °C to 1300 °C. Dry block calibrators can be calibrated within -30 to 1300 °C. Thermocouples can be calibrated between -30 °C and 1000 °C. Resistance thermometers can be calibrated between -30 °C and 960 °C. The basis of each calibration is the international temperature scale of “ITS-90”.
Measurements are executed in accordance with DAkkS calibration guidelines of the German national metrology institute (PTB) for temperatures close to defined fixed points. This ensures the best possible determination of the temperature characteristic curve. If desired, other temperature values (e.g. from real operational areas) can be included in the calibration.
Please get in touch with us if you have any other questions about our calibration service.
For fast handling of your calibration and maintenance orders, please use our product return procedure.
Pressure calibration service
The calibration laboratory for “absolute pressure and positive overpressure” allows the calibration of analogue and digital pressure measuring devices and pressure sensors with an electrical output signal (e. g. 0...10 V, 4...20 mA, ...).
Calibration is carried out as a comparison measurement against a dead weight tester utilised as the reference standard. The dead weight tester is used to pressurise the instrument under test with a defined pressure from 1...1200 bar. Depending on the actual measuring range, the smallest possible measuring uncertainties are 0.7 mbar.
Please get in touch with us if you have any other questions about our calibration service.
For fast handling of your calibration and maintenance orders, please use our product return procedure.
Electric values calibration service
Resistors and ohmmeters can be calibrated from 0 to 2 kΩ. Depending on the resistance value, the smallest possible measuring uncertainty is 0.1 mΩ. DC voltmeters and transmitters can be calibrated between 0 and 20 VDC with a smallest possible measuring uncertainty of 2 μV. DC testing and measuring devices for standard signals (0)4...20 mA can be calibrated with a smallest possible measuring uncertainty of 0.05 μA.
Please get in touch with us if you have any other questions about our calibration service.
For fast handling of your calibration and maintenance orders, please use our product return procedure.