Menu

Temperature sensor Type WBA

 

Product description

Possible areas of application Temperature sensor Type WBA

Temperature sensors have very distinct fields of operation and the conditions they are subject to are often harsh. A variety of requirements must be considered when developing the sensors:

  • Special installation locations
  • Special environmental conditions
  • Vibration resistance
  • Short response times
  • Long service life

The advantage for you is that our experienced engineers are aware of these requirements and factor them into the product design, providing a reliable and targeted solution to the problem.

 

Description

Surface temperature sensor with connecting cable. This sensor is designed for measuring surface temperatures by means of installation or bonding. This sensor is used e.g. on panel heaters.

Indirect temperature measurement means that measurements do not need to be taken directly in the process. This prevents chemicals, for example, from influencing the sensor. Thanks to the optional digital sensor with 1-wire Bus interface, only one connecting cable is required for communication and voltage supply. A large number of sensors can communicate on a bus line with the control system.

Technical features:

  • Simple assembly
  • High electric strength
  • Water-proof and steam-proof connection between bush and connecting cable
  • Available with optional drill hole to enable attachment to surfaces
  • Connecting cable available with different insulating materials depending on application.
    Shielded variant also available on request
  • Customer-specific fitting lengths and fixing thread on request
     

„Made in Germany“ seal of quality
Customers are impressed by the durability, robustness and precision of our products. To ensure all quality requirements are met, SIKA develops and manufactures its product range exclusively in Germany. In this way, we guarantee smooth co-engineering between us and our clients, superior branded goods and excellent delivery reliability.

Technical features

Technical features

For surface temperature measurement for build-in or glue-in
Accuracy class

 
Resistance thermometer class A and B
Temperature sensor NTC 5k ±0.5 °C (beta 1 %)
Digital 1-wire bus temperature sensor ±0.5 °C (-10…85 °C)
Diameter* SW6 / SW8
Length*
 
40 mm
50 mm
Material*
 
Brass 2.0401 / 2.0402
Stainless steel 1.4571
Sensor element*


 
1 x Pt1000 2-wire
2 x Pt1000 2-wire
1 x DS18B20U + (digital) integrated protection circuit
1 x NTC 5k
Measuring insert Not interchangeable
Max. temperature -50...400 °C
Process connection*
 
Square for build-in or glue-in
Square with borehole 5 mm
Electrical connection




 
PVC-connection
Silicone cable
FEP-cable
FEP-cable, wire-braided
Databus-cable 120 Ohm, shielded
Radox-cable, shielded
Cable length


 
1.0 m
1.5 m
2.0 m
2.5 m

 * Other specifications available on request

 

Documents

Datasheet

 

Contact

Contact us

 
For inquiries or further informations please contact our product specialists by using the contact form below. Thank you!
Please fill all required fields*.
 
Go to top